SPECIFICATIONS
Accuracy
PPM OF SETTING ± RANGE NOISE
From Factory 1 Year
200mV ± 20 ppm ± 1V ± 30 ppm ± 2V
2V ± 15 ppm ± 4V ± 25 ppm ± 6V
20V ± 13 ppm ± 13V ± 22 ppm ± 50V
120V ± 14 ppm ± 250V ± 23 ppm ± 400V
1200V ± 15 ppm ± 2.5V ± 24 ppm ± 4V
Noise & Stability
RANGE NOISE (0.1 TO 10HZ) 24HR STABILITY (DC TO 0.2HZ)
200mV 1V 1V
2V 2V ± 0.5 ppm ± 2V
20V 15V ± 0.5 ppm ± 10V
120V 150V ± 0.5 ppm ± 100V
1200V 1.5mV ± 0.5 ppm ± 1mV
Temperature Coefficient
The temperature coefficient adder is applicable only when outside of the ± 5°C window of the calibration temperature.
RANGE PPM OF SETTING + V/1°C
200mV 2.5 ppm + 0.1
2V 1.5ppm + 0.6
20V 1.5ppm + 6
120V 1.5ppm + 30
1200V 1.5ppm + 300
General Performance Characteristics
The table below gives the general operating characteristics of the 2701C. Resolution refers to the minimum adjustment that may be made in the selected range. Max Current refers to the maximum amount of current that may be supplied by the selected range without affecting its accuracy (4-wire mode must be used). Wideband Noise refers to the maximum amount of microprocessor and power supply noise (from 10Hz to 10kHz) that may be present on the output voltage. The Linearity of the 2701C is defined as the maximum allowable deviation from a straight line between the zero and full-scale outputs on each range. Output Impedance refers to the impedance of the voltage amplifier.
2701C PERFORMANCE CHARACTERISTICS
Range Resolution Max Current Wideband Noise Linearity Output Impedance
200mV 100nV --- 25VRMS ± 0.5V 450
2V 1V 25mA 80VRMS ± 1V 1m
20V 10V 25mA 130VRMS ± 10V 5m
120V 100V 25mA 500VRMS ± 100V 50m
1200V 1mV 25mA 800VRMS ± 1mV 500m
Output Settling Time
The table below gives the maximum allowable error remaining after the given time following a change in output voltage. The errors are given in ppm of output voltage change.
RANGE 0.5 SECONDS 1 SECOND 10 SECONDS
20V and below 20 ppm 5 ppm 1 ppm
120V 30 ppm 7 ppm 2 ppm
1200V 50 ppm 10 ppm 5 ppm
Other Specifications
Warm-up Time: 15 seconds to within 15 ppm of final value 30 minutes to rated specifications
Power: 115/230V ± 10% at 45 to 65Hz at 80VA
Size: 89mm (3.5") high x 432mm (17") wide x 432mm (17") deep
Weight: 11Kg (24lbs) net, 13Kg (29lbs) shipping
Operating Temperature Range: 0 to 50°C
Storage: -30°C to 70°C
Humidity: 70% RH max at 40°C (non-condensing) |