vishay 自己产的成品标准电阻
FEATURES
• Temperature coefficient of resistance (TCR):
To ±0.3 ppm/°C (+15°C to +45°C) (see Table 1)
• Max TCR: 10 to 30 ppm window (see Figure 3)
• Resistance range: 1Ω to 150 kΩ (for higher and lower
values, please contact Applications Engineering)
• Available up to six significant digits (e.g., 9K99962)
• Resistance tolerance available for ordering: to
±0.005% (50 ppm)
• High accuracy: to 10 ppm (see Table 1)
• Stability: ±0.0005% (5 ppm) at 25°C, 12 months
• No humidity effect: resistive element hermetically
sealed against moisture
• Small size and robust construction
• Direct plug-in device for most DMM’s available in the
market
• Each unit is supplied with certificate of accuracy(1)
• RF shielded case
• Four terminal constructions with an additional
ground socket
• Vishay Foil resistors are not restricted to standard
values; specific “as required” values can be
supplied at no additional cost or delivery time
(e.g., 1K23456 vs. 1K)
• Thermal stabilization time <1 s (nominal value achieved
within 10 ppm of steady state value)
• Electrostatic discharge (ESD) at least to 25 kV
• Rise time: 1 ns effectively no ringing
• Current noise: 0.010 μVRMS/V of applied voltage
(<-40 dB)
• Voltage coefficient: 0.1 ppm/V
• Non inductive: 0.08 μH
• Non hot spot design
漂亮~ 一盒5个不知道要多少刀拉? 这个好 估计不便宜吧 山寨这个如何,盒子容易,就是香蕉插头不好搞,里面放金封,应该不必他差吧{:142_381:} {:139_277:} 看上面是六位的标定,说明则很高 {:139_277:}太吸引眼球了~
漂亮~ 不知道顶面那个孔是干什么的。 xuanmic 发表于 2014-10-11 08:35
不知道顶面那个孔是干什么的。
接屏蔽地(GUARD)用的
价格肯定不菲吧 多少$?n 漂亮,心里长草~ 多少刀刃死?{:142_376:} 本帖最后由 simon51 于 2015-9-19 09:38 编辑
彭鹏 发表于 2015-9-18 18:49
多少刀刃死?
这个应该是定制品,价格可以问问代理商,产品介绍视频(打开较慢):http://www.digikey.com/videos/en ... o-VFR/3446397628001
友邦的东西看着真扎实,羡慕。 {:142_381:}谢谢分享。 没有里面图。。{:142_381:}
页:
[1]